PT-C-HDAEDE PureTools - HDMI 2 Audio Inserter and Extractor, 4K (60Hz 4:4:4)

4K 18Gbps HDMI Audio De-Embedder and Embedder. The PT-C-HDAEDE is an HDMI 2.0 audio de-embedder and embedder that enables a wide range of complex audio manipulations, making it suitable for both private home theater and professional high-end installations. It supports the full HDMI 2.0 bandwidth of 18 Gbps at the HDMI input/output and can decouple the HDMI audio signal digitally and analogically. At the same time, an analog audio signal (line/mic/mic with 48V phantom power) can be embedded and mixed with the HDMI audio, or even replace it entirely. ARC signals are also transmitted in reverse via HDMI. The integrated downscaler downscales 4K resolutions to Full HD/1080p, making the system compatible with older display devices. PureTools - High-quality electronic products for commercial applications. The PT-C-HDAEDE 4K 18Gbps HDMI Audio De-Embedder and Embedder enables complex audio manipulation, opening up entirely new installation concepts. It is equipped with one HDMI input and one HDMI output, including HDMI ARC support, as well as connectors for digital (S/PDIF coaxial, max. 96KHz/16Mbps) or analog (balanced, 5-pin Phoenix) audio extraction, and one analog connector (3-pin Phoenix) for separate audio integration. The HDMI connectors support the full HDMI v2.0 bandwidth of up to 18Gbps for resolutions up to 4K@60 (4:4:4). All standards of the HDMI v2.0 specification are supported, such as HDR, DeepColor 12-bit, and HDCP 2.2, as well as digital audio formats up to LPCM 7.1/24-bit/96kHz, Dolby Atmos, and DTS-X. Thanks to the ability to freely combine the various audio input and output signals, the PT-C-HDAEDE can be used, among other things, as a simple audio extractor or embedder, but can also function in more complex situations as a voice-over unit, microphone preamplifier, or audio mixer. Four DIP switches on the front of the device control the entire mixing behavior of the PT-C-HDAEDE. A total of 16 switch combinations can configure virtually any conceivable output format configuration. The four DIP switches control the following settings, in this order: 1. Enable/disable analog audio input, 2. Enable/disable HDMI input audio, 3. HDMI output audio configuration, 4. S/PDIF output audio configuration. A precise description of the behavior is included in the detailed manual. Also located on the front is a toggle switch with three possible positions that determines the format of the analog audio input. You can choose between a "Line," "Mic," or "Mic 48V" format. The latter setting is suitable for integrating a (condenser) microphone with 48V phantom power. Both HDMI input and output support the return transmission of an audio signal via ARC. The integrated HDMI downscaler can downscale an incoming 4K signal to Full HD/1080p, making the PT-C-HDAEDE compatible with both current and older display devices. The micro USB port allows for easy firmware updates. Two additional buttons on the front of the device allow the volume of the analog audio input to be adjusted in 1dB steps from -18dB to +24dB. The 5V/1A power connector on the rear of the device can be screwed on, making it suitable for professional installations. A power LED also indicates the operating status. The compact housing, with an overall size of 151 x 93.5 x 21 mm, takes up minimal space during installation and weighs just 360 g. This means that the PT-C-HDAEDE can be installed and operated invisibly and in the tightest of spaces, e.g., in an AV rack in a server room or in a low-board. PureTools - High-quality electronic products for commercial applications. The PureTools range includes high-quality audio-video electronic products such as switchers, splitters, converters, and extenders for commercial AV installations and applications. The focus is on the transmission of digital signals such as HDMI, DisplayPort, DVI, and SDI. The combination of sophisticated technology according to the latest standards, combined with intelligent and practical innovations, makes the products in the PureTools series exceptional talents for professional installers and ensures optimal project execution thanks to consistent performance.

• Audio extraction and integration with HDMI and D/A inputs / outputs
• Supports 18Gbps for resolutions up to 4K UltraHD 60Hz
• Complex audio manipulation including MIC/LINE mixing and HDMI integration
• 48V phantom power, digital / analog audio decoupling
• Downscaling (4K - 1080p), pass-through for ARC, formats up to DTS-X / Atmos